0 - 2.4A Blue (445-450nm) Laser Diode Driver 12V with Optional TTL (B1000 V3)

GENERAL CHARACTERISTICS

Wavelengths:                           445-450nm

Output Power:                         0 - 2400mA (4.2V), 0-2200mA (4.5V), 0-1800mA (5.0V)

Input Voltage:                         12V (8-14V min-max range) JST cable

Dimensions:                           50mm x 36mm x 25mm;

Operating Temperature:          10 – 40°C

TTL:                                        Optional, 20Khz

Notes:                                     

Reverse polarity protection, optional 12V fan support.

Step down design, maximum output current can be adjusted.

Always check current on a dummy load before connecting laser diode.

TTL: Driver is normally on, a TTL signal can be used to pulse the laser at up to 20kHz.