- Operating voltage : 12V (drop down driver)
- Continuous drive capacity: 2.5A
- Analogue Modulation (0-5V)
This driver has analogue modulation: The output is zero (off) when no power is supplied to the analogue modulation connector, as the voltage to the analogue connector is increased (5V max) the output of the driver increases up to the maximum set by the laser diode current set potentiometer.
The maximum output current of this driver depends on the diode drive voltage, for higher voltage diodes the maximum output current will be less 2.5A.
These drivers can be used in parallel to increase the output current, see pictures for an example of two drivers wired in parallel to make an analogue driver for 4-5W blue laser.
Supplied with connector cables terminated with JST plugs to fit the driver board connectors.