| Items in this product category |
|---|
|
New
|
Low Value SMD Resistor Assortment (100 pce, 805 size)
20 x 2.2 Ohm, 20 x 2.7 Ohm, 20 x 3.3 ohm, 20 x 3.9 Ohm and 20 x 4.7 Ohm 805 size Resistors.
Suitable for current set of our boost driver.
|
Detailed viewItem number OFL9
1.00 GBP
0.05 kg
|
Available from stock |
|
Professional Trimmer Tool - Vishay-Spectrol
Tool for adjusting trimmers such as the current set on driver boards. One shrouded and one un-shrouded tip, makes open style trimmer adjustment a breeze.
|
Detailed viewItem number OFL240
2.20 GBP
0.05 kg
|
Available from stock |
|
Laser Driver Board V1 - 80-300mA+ optional TTL
An adjustable constant current (ACC) driver, 80- 300mA+, 5-9V, with (optional) TTL control.
Works well for module builds with Rohm diode (100mW cw), LPC-815 Sled diode (~250mW) and PHR803-T Blu-ray diode (~110mW).
|
Detailed viewItem number OFL144
2.90 GBP
0.01 kg
|
Available from stock |
|
LM358 Constant Current Driver, 3.5 -5.0V - V2
Constant Current Driver based on LM358 IC control. Designed for 50-250mW red laser diodes and 50-300mW IR diodes (30-100mw green modules). Standard 8.8 *19.5mm dimensions.
|
Detailed viewItem number OFL156
3.20 GBP
0.02 kg
|
Available from stock |
|
High Power Red Laser Driver Board - Hand-held Lasers
Suitable for battery powered hosts such as our OFL 176 Focusing Laser Host.
0-300mA+, 6V nominal, reverse polarity protection (battery).
|
Detailed viewItem number OFL184
3.90 GBP
0.02 kg
|
Available from stock |
|
Variable Current Step-up (Boost) 405nm Laser Driver Board
This step-up driver board works from 3-5V input and steps up the output voltage to suit 405nm (Blu-ray) laser diodes. Drive current is set with a variable pot on the driver board. 20- 500mA.
|
Detailed viewItem number OFL74
4.30 GBP
0.05 kg
|
Available from stock |
|
New
|
High Current LM358 Laser Diode Driver (405nm / 445nm / 635nm / 650nm / IR Diodes)
This is a current regulating linear driver based on the LM358 chip with a high current transistor output stage. Requires a supply voltage around 1.5V higher than the operating voltage of the laser diode. Circuit is used in some 1W 445nm lasers powered by 2 x CR123 batteries.
|
Detailed viewItem number OFL301
4.50 GBP
0.05 kg
|
Available from stock |
|
External Driver Board For 635-680nm Laser Diodes
This driver board is suitable for continuous operation in laser light show type applications.
Designed for red lasers, 635-680nm up to 200mW with optional TTL control.
As used on OFL 194 Red Laser Module.
|
Detailed viewItem number OFL265
4.99 GBP
0.05 kg
|
Available from stock |
|
New
|
1W Step-up (Boost) Laser Driver Board for 445nm and 405nm LD
This step-up driver board works from 3.7-4.2V input and steps up the output voltage to suit 445nm (blue) and 405nm (Blu-ray) laser diodes. Current draw~ 1.5-1.6A with an output current of 1A.
11 x 22.5mm plus spring.
|
Detailed viewItem number OFL179
9.25 GBP
0.05 kg
|
Available from stock |
|
New
|
17mm Circular Variable Boost Driver Board for 405/445nm Laser Diodes (1.5-1.8A with appropriate heatsink)
This step-up driver board works from 3.7-4.2V input and steps up the output voltage to suit 445nm (blue) and 405nm (Blu-ray) laser diodes. Output current of up to 1.8A (with heatsink).
|
Detailed viewItem number OFL39
9.50 GBP
0.05 kg
|
Available from stock |
|
New
|
External Driver for 445nm and High Power 405nm Diodes, 1.2W (Supports TTL Modulation)
A 12V operation linear dropout driver for high power applications ( up to 1200mA).
TTL modulation up to 20KHz. Fan support.
|
Detailed viewItem number OFL118
15.99 GBP
0.02 kg
|
Available from stock |
