These 3-5V modules have a built-in driver circuit and are water resistant.

Specification:

• Wavelength : 650nm +/-5nm
• Output Power : 50mW
• Operating Voltage: 3.0-5.0V -  5.5mm x 2.1mm socket
• Current: <100mA controlled by ACC driver circuit
• Dimensions: 18mm diameter x 110mm
• Pattern: Dot
• Lifetime: >4000hrs
• Operating Temperature: 10 – 40°C
• Supplied without power supply, select plug type in options below

These compact 3-5V modules have a built-in driver circuit and use a single adjustable coated focusing lens.

Specification:

• Wavelength : 650nm +/-5nm
• Output Power : 100mW
• Operating Voltage: 3.0-5.0V
• Current: <100mA controlled by ACC driver circuit
• Dimensions: 16mm diameter x 60mm
• Pattern: Adjustable Focus Dot
• Lifetime: >4000hrs
• Operating Temperature: 10 – 40°C

This is a compact 650nm, 16mm diameter 200mW laser diode module with a built-in 5V TTL driver.

Adjustable locking focus. Can be used with line and cross generator discs.

Specification

• Wavelength : 650-660nm
• Output Power : 100-105mW
• Operating Voltage: 5.0V
• Operating Current:: <220mA
• Recommended Duty Cycle: 5 minutes on / 1 minute off
• OperatingTemperature: 10 - 40 °C
• TTL Control: 20kHz @5V
• Laser Head Dimensions: 16mm diameter x 70mm long
• Module can be fitted with line and cross lenses
• Adjustable locking focus

Operation

For continuous operation (5min +) mount the module in a heatsink to ensure the operating temperature is not exceeded.

The focus is adjustable by rotating the lens on this laser.

Power should be supplied via the red and black cables. The white cable gives optional TTL control (connect the white wire to the red wire for continuous operation).

These compact 5V modules have a built-in driver circuit and adjustable locking focusing lens. Based on 250mW open can laser diode. Specification:

• Wavelength : 650nm +/-5nm
• Output Power : 200mW +/- 10% depending on beam pattern
• Operating Voltage: 5.0V
• Current: <250mA controlled by ACC driver circuit
• Dimensions: 16mm diameter x 40mm
• Pattern: Adjustable focus dot or spot
• Lifetime: >4000hrs
• Operating Temperature: 10 – 40°C
• Power Connection: 5.5 x 2.1mm Socket, 1200mm cable

These modules accept our line and cross pattern generator discs.

 Specification:

• Wavelength : 650nm +/-5nm
• Output Power : 180-200mW +/- 5% depending on beam pattern
• Operating Voltage: 5.0V - 24.0V
• Current: <300mA controlled by ACC driver circuit
• Dimensions: 16mm diameter x 40mm
• Pattern: Adjustable focus dot or spot
• Lifetime: >4000hrs
• Operating Temperature: 10 – 40°C
• Power Connection: 5.5 x 2.1mm Socket

These modules aare supplied with Line and Cross pattern generator discs.

If you would like supplied as line or cross pattern with disc fitted please leave a note at checkout.

Compact adjustable focus 200mW red laser module for 3-5V operation in 12mm x 45mm case.

• 650nm bright red
• 200mW (before optics)
• Focusable optics (dot or circle pattern output)
• 12mm diameter x 40mm long body (plus lens)
• 3-5V operation

This is a compact 650nm, 16mm diameter 200mW laser diode module with a built-in 5V TTL driver.

Adjustable locking focus. Can be used with line and cross generator discs.

Specification

• Wavelength : 650-660nm
• Output Power : 200-205mW
• Operating Voltage: 5.0V
• Operating Current:: <320mA
• Recommended Duty Cycle: 5 minutes on / 1 minute off
• OperatingTemperature: 10 - 40 °C
• TTL Control: 20kHz @5V
• Laser Head Dimensions: 16mm diameter x 70mm long
• Module can be fitted with line and cross lenses
• Adjustable locking focus

Operation

For continuous operation (5min +) mount the module in a heatsink to ensure the operating temperature is not exceeded.

The focus is adjustable by rotating the lens on this laser.

Power should be supplied via the red and black cables. The white cable gives optional TTL control (connect the white wire to the red wire for continuous operation).

High power, adjustable focus.

Specification

• Wavelength : 660nm +/-5nm
• Output Power : 200mW (spot or dot pattern)
• Operating Voltage: 5.0V
• Current: <220mA controlled by ACC driver circuit
• Dimensions: 16mm diameter x 110mm
• Pattern: Dot or circle
• Lifetime: >4000hrs
• Operating Temperature: 10 – 40°C
• Power Socket: 5.5 x 2.1mm

Specification

• Wavelength : 650-660nm
• Output Power : 150mW
• Operating Voltage: 6.0-12.0V
• Operating Current:: <180mA
• Operating Lifetime: >4000hrs
• OperatingTemperature: 10 - 40 °C
• TTL Control: 20kHz @5V
• Laser Head Dimensions: 33mm x 33mm x 45mm long

Specification

• Wavelength : 638nm
• Optical Power: 100mW wide beam pattern
• Operating Voltage: 12.0V
• Operating Current:: >200mA
• Operating Lifetime: >4000hrs
• Operating temperature: 10 - 30 °C
• TTL Control: 20kHz @5V
• Laser Head Dimensions 30mm x 30mm x 55mm

Operation

The diode head should not normally be disconnected from the driver board (the diode is very sensitive to static and any accumulated charge in the power supply). Power should be supplied via the red and black cables. The red socket gives optional TTL control (connect the wires together to blank the laser).