600mW combined output RGB chassis with three direct-diode lasers: 520nm + 638nm + 445nm. Near-white combined laser output. 3 channel TTL modulation.
These modules are made for light show projectors, the beam alignment is normally adequate for purpose but does vary and ~90% overlap is typical with some stray red/green or blue light at the edge of the beam.
- Specification
- Lasers diodes: 520nm (60-80mW) + 638nm (120-180mW) + 445nm (300-400mW) Approx,
- Combined Optical Output Power: ~600mW
- Operating Voltage: 12VDC
- Operating Current: 0.8-1.0A
- Warm-up Time: <1 minute
- Operating Lifetime: >4000hrs
- Operating Temperature: 0 - 40 °C
- Modulation: TTL 30kHz
- Laser Chassis Dimensions :60mm x 54mm x 45mm (height)
- Beam Characteristics :Near TEM pattern, Divergence <2.5mrad, Spot roundness >85%
Notes on Operation:
- Power connections: Power +ve = red, power –ve = black
- TTL connections: Blue/Red/Green sockets (Typical cable: yellow/black)
Picture 2 of the RGMB module operating shows W800 driver