Red (635-660nm) Laser Modules (Dot or Circle Pattern)

Compact 3V laser module, 1mW Class 2 Laser. 8mm diameter.

Compact 3V laser module, 1mW Class 2 Laser. APC, 8mm diameter.

Compact 3V laser module, 1mW, 6.5mm diameter

Compact low cost 3V laser module, 1mW Class 2 Laser. 8mm diameter.

Compact low cost 3V laser module, 1mW Class 2 Laser. 6.6mm diameter. Wire connection.

Compact 3V laser module, 3mW, 6.0mm diameter

Compact 3V laser module, 3mW, 6.0mm diameter. 635nm red modules appear brighter than 650nm modules.

Compact Industrial quality 3V laser module, 5mW Class 3R Laser. 8mm diameter.

Compact Industrial quality 3V laser module, 5mW Class 3R Laser. 10mm diameter.

Compact 3-5V laser module, Industrial Quality

A 3V focusing module rated at 5mW.

A 3V focusing module rated at 3-5mW with glass lens.

A 3.0-5.0V focusing red laser module rated at 5mW. The TTL driver accepts up to 15kHz TTL signal to allow fast switching or PWM control of apparent brightness.

A 3.0-5.0V focusing module with power cable to match standard power supplies.

6mm diameter module with 9cm long leads, 3V operation (built in current limiting resistor).

This module has a heavy duty non-ferrous metal case with a locking ring to allow the focus to be set after adjustment and resist vibration etc. 5mW Class 3R

635nm for superior visibility with glass optics.

Small low-cost focused dot module 3V. Suitable for 3V battery operation e.g. 2 x 1.5V AA battery.

Compact Industrial quality 3V laser module, 10mW Class 3B Laser. 8mm diameter.

This is a compact (12 x 35mm) focusing red laser module with a driver circuit to operate at 3-4V.

18mm diameter body, industrial quality glass optics.

This module has a heavy duty non-ferrous metal case with a locking ring to allow the focus to be set after adjustment and resist vibration etc.

This module has a heavy duty non-ferrous metal case with a locking ring to allow the focus to be set after adjustment and resist vibration etc.

This is a compact 650nm, 16mm diameter 100mW laser diode module with a built-in 5V TTL driver.

Adjustable locking focus. Can be used with line and cross generator discs.

These compact 5V modules have a built-in driver circuit and adjustable locking focusing lens. Based on 200mW open can laser diode.

Supplied as dot module, can be fitted with line or cross pattern discs.

Compact adjustable focus 200mW red laser module for 3-5V operation in 12mm x 45mm case.

 High power, adjustable focus.

This is a 655nm, 18mm diameter 200mW laser diode module with a heavy duty driver board suitable for projects, installations, light shows etc. Also suitable for use as a replacement laser in many disco laser systems.

This is a 655nm, 18mm diameter 200mW laser diode module with a heavy duty driver board suitable for projects, installations, light shows etc. Also suitable for use as a replacement laser in many disco laser systems.

This is a 655nm, 200mW laser diode module in a heatsink mount with a 12V driver suitable for projects, installations, light shows etc. Also suitable for use as a replacement laser in many disco laser systems.

These laser modules feature a fan cooled laser head and a 12V TTL modulated driver box. Wide Beam (15mm).

638nm diode gives the same brightness as 200mW 650nm.

This is a 655nm, 200mW laser diode module in a heatsink mount with a 12V driver suitable for projects, installations, light shows etc. Also suitable for use as a replacement laser in many disco laser systems.

This economical high-power 635nm module has a TTL modulation option. Beam pattern has small wings with a little scatter, typical of this type of diode (see photo).