Power Supplies, Battery Boxes, Cables and Connectors

Holder for 2 AAA Batteries - Solder Tags, pre-drilled mounting holes.

Ideal for 3V modules, supplied with 200mm leads.

Switched battery box with sliding cover and 200mm leads with clips.

Switched battery box with sliding cover and 200mm leads with 5.5 x 2.1mm plug.

Supplied individually, 100mm leads.

This 1200mA powerbank is rechargable using the supplied USB cable. Will operate a typical 5mW red laser for a couple of days, a 100mW red laser for  ~ 6-8 hours or a 10mW Green (520nm)  Laser for 6-8 hours.

Adaptor to allow modules with 2.5 x 5.5mm socket to be used with a 2.1mm x 5.5mm power supply, switch, extension leads or OFL333 terminal connector.

Cable to connect USB power supply to a 5.5 x 2.1mm plug.

Cable can be used to install our laser modules with 5.5 x 2.1mm sockets.

Cable can be used to install our laser modules with 5.5 x 2.5mm sockets.

Cable can be used to extend a power supply lead with 5.5mm x 2.1mm plugs by 1.5 metres. Works with all our laser modules with 5.5 x 2.1mm sockets.

Cable can be used to extend a power supply lead with 5.5mm x 2.1mm plugs by 1.5 metres. Works with all our laser modules with 5.5 x 2.1mm sockets.

Cable can be used to split a power supply lead with 5.5mm x 2.1mm plugs. Works with all our laser modules with 5.5 x 2.1mm sockets.

Cable can be used to split a power supply lead with 5.5mm x 2.1mm plugs. Works with all our laser modules with 5.5 x 2.1mm sockets.

Power 3 lasers from one power supply.

Cable allows 4 laser modules with 5.5mm x 2.1mm connectors to operate from one power supply.

Cable allows 8 laser modules with 5.5mm x 2.1mm connectors to operate from one power supply.

Add a switch to laser modules with 5.5mm x 2.1mm power supply.

Cable to connect the  JST-XH sockets used on driver boards to a power supply with a 5.5 x 2.1mm plug.

JST-XH connector cable, tinned wire ending, 22AWG flexible silicone wire ~5A capacity

JST-XH connector cable, tinned wire ending, 26AWG  ~2A capacity

Economical plug adapter with a 5.5mm x 2.1mm plug to match many of our 3V laser modules. (Will also fit 5.5 x 2.5mm sockets.)

Premium quality 1.2A plug adapter with a set of connector tips including 5.5mm x 2.1mm plug to match many of our 3V laser modules.

Economical plug adapter with a 5.5mm x 2.1mm plug to match many of our 5V laser modules. (Will also fit 5.5 x 2.5mm sockets.)

Economical plug adapter with a 5.5mm x 2.1mm plug to match our 12V driver boards.

Economical plug adapter with a 5.5mm x 2.1mm plug to match many of our 3V laser modules. Euro plug. (Will also fit 5.5 x 2.5mm sockets.)

Economical plug adapter with a 5.5mm x 2.1mm plug to match many of our 5V laser modules. Euro plug. (Will also fit 5.5 x 2.5mm sockets.)

Economical plug type power supply with 2 pin plug.

Economical plug adapter with a 5.5mm x 2.1mm plug to match our 12V driver boards.

Economical plug adapter with a 5.5mm x 2.1mm plug to match many of our 3V laser modules. US plug. (Will also fit 5.5 x 2.5mm sockets.)

Economical plug adapter with a 5.5mm x 2.1mm plug to match many of our 5V laser modules. US plug. (Will also fit 5.5 x 2.5mm sockets.)

Economical plug adapter with a 5.5mm x 2.1mm plug to match our 12V driver boards.

A compact Medical grade international power supply with UK, European USA & Australian interchangeable plug adaptors.

These power supplies are multi-voltage input (100-250V) with 12V output @3.3A .

Add a dimmer switch to 7.5 -12V laser modules with 5.5mm x 2.1mm power supply.

Add a dimmer or strobe to 5V laser modules with 5.5mm x 2.1mm power supply connector.

This neat plug clamps over a 2 pin US plug to convert it to UK 3 Pin, fused at 5A. Made to BS1363.

UK 3 pin plug mains cable with Kettle Connector (Fused)