OEM 300mW RGB Laser Chassis, TTL Modulation 12V W300 V2

600mW combined output RGB chassis with three direct-diode lasers: 520nm + 638nm + 445nm. Near-white combined laser output. 3 channel TTL modulation.

These modules are made for light show projectors, the beam alignment is normally adequate for purpose but does vary and ~90% overlap is typical with some stray red/green or blue light at the edge of the beam.

• Specification
• Lasers diodes: 520nm (50-60mW) + 638nm (100-150mW) + 445nm (100-150mW) Approx,
• Combined Optical Output Power: ~300mW
• Operating Voltage: 12VDC
• Operating Current: 0.8-0.90A
• Warm-up Time: <1 minute
• Operating Lifetime: >4000hrs
• Operating Temperature:  0 - 40 °C
• Modulation: TTL 30kHz
• Laser Chassis Dimensions :60mm x 54mm x 45mm (height)
• Beam Characteristics :Near TEM pattern, Divergence <2.5mrad, Spot roundness >85%

Notes on Operation:

1. Power connections: Power +ve = red, power –ve = black
2. TTL connections: Blue/Red/Green sockets (Typical cable: yellow/black)

Picture 2 of the RGB module operating shows W800 driver