Specification

• Suitable for alignment applications
• Dimensions: 12mm diameter x 40mm long
• Wavelength: 520nm Green
• Power: 50mW
• Operating Current: <350mA
• Operating Voltage: 3-5V max.
• Lifetime: >6000hrs
• Cross pattern, Pre-focused
• 5.5 x 2.1mm Connector

These direct diode modules use an Osram Green Laser Diode and can operate between -20 and 40 degrees centigrade. Highly stable output with good beam pattern from adjustable focus glass optics.

• Optical Power: 50mW diode, 45mW after optics.
• Wavelength: 515-520nm at 20-25 degrees C.
• Operating temperature: -10 - 40 degrees C.
• Operating Voltage: 3- 5V
• 12 x 40mm housing
• Adjustable focus will accept 8mm line or cross generator discs
• The coated optics and direct diode in these modules give a particularly bright dot or line for the respective power ratings.
• 5.5 x 2.1mm Socket Cable

Supplied with Dot, Line and Cross Tips

Adjustable focus, will accept line and cross pattern discs.

Specification

• Wavelength : 515-520nm +/- 5%
• Optical Power: 50mW  optical output
• Operating Voltage: 12.0V
• Operating Current:: 150mA
• Operating Lifetime: >4000hrs
• Operating temperature: 10 - 40 °C
• TTL Control: 20kHz @5V
• Laser Head Dimensions 33mm x 33mm x 60mm
• Adjustable focus dot pattern, will accept line and cross pattern discs.

Power should be supplied via the red and black cables. The blue and white cables give optional TTL control (connect the wires together to blank the laser, the white wire (ground) will pull blue wire low).

These direct diode modules use an Osram Blue Laser Diode and can operate between -10 and 40 degrees centigrade. Highly stable output with good beam pattern from adjustable focus glass optics.

• Optical Power: 80mW diode
• Wavelength: 450nm at 20-25 degrees C.
• Operating temperature: -10 - 40 degrees C.
• Operating Voltage: 3- 5V
• 12 x 40mm housing
• Adjustable focus will accept 8mm line or cross generator discs
• The coated optics and direct diode in these modules give a particularly bright dot or line for the respective power ratings.
• 5.5 x 2.1mm Socket Cable

Supplied with Dot, Line and Cross Tips

These direct diode modules use an Osram Laser Diode and can operate between -20 and 40 degrees centigrade. Highly stable output with good beam pattern from adjustable focus glass optics.

• Wavelength: 450nm
• Optical Power: 80mW
• Operating Voltage: 5.0V,  5.5 x 2.1mm socket
• Operating Current: <200mA
• Operating Lifetime: >4000hrs
• Operating temperature: -10 - +40 °C
• Laser Head Dimensions: 16mm diameter x 75mm
• Adjustable focus module fitted with 90 degree fan angle line lens (other fan angles available on request)
• The coated optics and direct diode in these modules give a particularly bright line for the respective power ratings.
• Focus Lock
• 400mm cable (1200mm optional)
• Class 3B Laser product

These direct diode modules use an Osram Laser Diode and can operate between -20 and 40 degrees centigrade. Highly stable output with good beam pattern from adjustable focus glass optics.

• Wavelength: 450nm
• Optical Power: 80mW
• Operating Voltage: 5.0V,  5.5 x 2.1mm socket
• Operating Current: <300mA
• Operating Lifetime: >4000hrs
• Operating temperature: -10 - +40 °C
• Laser Head Dimensions: 16mm diameter x 75mm
• Adjustable focus module fitted with 110 degree fan angle cross-line lens (other fan angles available on request)
• The coated optics and direct diode in these modules give a particularly bright line for the respective power ratings.
• Focus Lock
• 400mm cable (1200mm optional)
• Class 3B Laser product

• Size: 16mm x 50mm
• Voltage range: 6-12.0V
• Operating Current: 700mA@ 12V, 1200mA @ 6V
• Driver Type: ACC
• Optical Output: 1000mW +/- 10%
• Wavelength: 450nm +/- 5 nm
• Projected pattern: dot or rectangle, supplied with line and cross pattern generator discs
• Operating temperature: 5 – 60°C 
• 5.5 x 2.1mm socket
• Duty cycle: 1 minute on / 1 minute off without heatsink bracket.
• It is recommended this module is mounted in two heatsink brackets type OFL135

This module has a high power diode in a compact case so the duty cycle will depend on adequate cooling. Without heatsink brackets it is suitable for intermittant use e.g. 1 minute on / 1 minute off; with suitable heatsink brackets 5 minutes on / 2 minutes off.

For continuous blue laser operation larger modules with a fan cooled heatsink are recommended.

• Class 3B Laser product

• Class 3B Laser product

Specification

• Size: 16mm x 64mm
• Voltage: 5.0V, 5.5 x 2.1mm socket
• Operating Current: <180mA
• Driver Type: ACC
• Optical Output: 100mW
• Wavelength: 405nm +/- 5 nm
• Projected pattern: line with generator disc
• Operating temperature: 10 – 40°C

These 5V modules are supplied with a removable line generator disc. Focus adjustable by rotating the front module section. The line disc can be removed (a pair of circlip pliers make unscrewing the retaining ring easy) to give a spot pattern (like a pointer).